Copyright 2010-2017 Obihai Technology, Inc.
47
Using Speed Dial to store a Feature Access Code prefix
There are many applications where a function can be invoked from the
Service Provider by calling a number that is a feature access code prefix
followed by a target number. For example, the prefix *48 followed by
the target extension such as 1002 may invoke from the Service Provider
the call-monitoring function on extension 1002. For this the user may
just dial *481002 directly. For better UX, however, you may also store
*48 in a speed dail and label it as Monitor on the GUI. To mark the
speed dial as a prefix, you append 2 or more dots to the number, such
as *48… When user presses the Monitor speed dial, the phone shows a
dial box on screen with *48 entered. User may then continue to dial the
target extension, or press another Speed Dial or BLF that is the target
extension to monitor.
Do Not Disturb
On/Off
Turn on/off the
Do Not Disturb
feature. If the function is bound to a specific
voice service, it is applied to incoming calls on that service only. Otherwise, it is
applied system wide to all incoming calls regardless which service the calls are
coming from).
Parameters:
-
Service: Optional. The service to apply this feature on. If no service is
specified, the feature applies to all calls the phone
on
off
Do Not Ring
On/Off
Turn on/off the
Do Not Ring
feature. When the feature is enabled, incoming
calls comes through like normally but phone does not play audible ring (call
waiting tone however will be played during call-waiting).
This function cannot bound to any specific voice service; it is applied system
wide to all incoming calls regardless which service the calls are coming from.
Parameters: None
on
off
Block
Anonymous
Callers
On/Off
Turn on/off the
Block Anonymous Caller
feature. If the function is bound to a
specific service, it is applied to incoming calls on that service only. Otherwise, it
is applied system wide to all incoming call regardless which service the calls are
coming from. If this feature is enabled, the phone rejects all incoming calls with
Caller ID (name/number) hidden (a.k.a. blocked).
Parameters:
-
Service: Optional. The service to apply this feature on. If no service is
specified, the feature applies to all calls on the phone.
on
off
Block Outgoing
Caller ID
On/Off
Turn on/off the
Block Caller ID
feature. If the function is bound to a specific
service, it is applied to outgoing calls on that service only. Otherwise, it is
applied system wide to all outgoing calls regardless which service is used for the
calls. If this feature is turned on, the phone will attempt to hide user’s caller ID
on outbound calls so the called party cannot see who’s calling.
Parameters:
-
Service: Optional. The service to apply this feature on. If no service is
specified, the feature applies to all calls on the phone.
on
off
Call Forward All
On/Off
Turn on/off the
Call Forward All Calls
feature. If the function is bound to a
specific service, it is applied to incoming calls on that service only. Otherwise, it
is applied system wide to all incoming calls regardless which service the calls are
coming from.
Parameters:
-
Service: Optional. The service to apply this feature on. If no service is
specified, the feature applies to all calls on the phone.
on
off
