IDP 100 Modem Series - Developer Guide
©
SkyWave Proprietary 49 T203, Version 04
5.6.5 %MGFG
– To-Mobile Message Get
Description
This command obtains the data of a specific to-mobile message.
The
<dataFormat>
parameter specifies whether the data is presented in text
format bounded by double-quote (") characters, ASCII-Hex format, Base64 (MIME)
format, or via transfer mode.
When text format is specified, ASCII data is bounded by double-quote (") characters,
although the following special characters are represented by a backslash (\) character
followed by two hexadecimal digits representing the special character’s ASCII value:
00..1F,22("),5C(\),7F..FF (all values are in hexadecimal).
When transfer mode is specified, transfer mode is entered after the information
response to exchange the data (and AT command mode automatically resumes once
the data exchange is complete).
The maximum length of a to-mobile message is 10,000 bytes, including the SIN byte
and the MIN byte.
Syntax
%MGFG="<fwdMsgName>",<dataFormat>
Parameters
<fwdMsgName>
The to-mobile message name reported by
%MGFS
or
%MGFN
<dataFormat>
0 Transfer mode to be entered after information response to transfer
message data (and AT command mode automatically resumes once the
data transfer is complete)
1 Text format message data (bounded by double-quote (") characters)
included in information response
2 ASCII-Hex format message data included in information response
3 Base64 (MIME) encoded message data included in information response
Information Response Syntax
%MGFG:"<fwdMsgName>",<msgNum>,<priority>,<sin>,
<state>,<length>,<dataFormat>[,<data>]
Parameters
<fwdMsgName>
See above for details
<msgNum>
Message number in the form aa.ss where aa is the system assigned 2-
digit message number and ss is the system assigned 2-digit message
sequence number
Summary of Contents for IDP 100 Series
Page 106: ...www SkyWave com ...