Confidential BTP-R880NP Programming Manual
- 25 -
[Notes]
• When the LSB of n is 0, emphasized mode is turned off.
• When the LSB of n is 1, emphasized mode is turned on.
• Only the least significant bit of n is enabled.
• This command and ESC ! turn on and off emphasized mode in the same way.
[ Default ]
n = 0
[Reference] ESC
!
[Example] 1B
40
1B 45 01
(
Emphasized mode is selected
)
41 41 41 41 41
0A
1B 45 00
(
Emphasized mode is not selected
)
42 42 42 42 42
0A
Results
:
ESC G n
[Function]
Turn on/off double-strike mode
[Format]
ASCII
ESC G
n
Hex 1B
47
n
Decimal 27 71 n
[Range]
0
≤
n
≤
255
[Notes]
• When the LSB of n is 0, double-strike mode is turned off.
• When the LSB of n is 1, double-strike mode is turned on.
• Only the lowest bit of n is enabled .
• Printer output is the same in double-strike mode and in emphasized mode.
[ Default ]
n = 0
[Reference] ESC
E
[Example]
See ESC E
ESC M n
[Function]
Select
character
font
[Format]
ASCII
ESC M
n
Hex 1B
4D
n
Decimal 27 77 n
[Range]
n = 0, 1, 2,3,48, 49,50,51
n
Function
Standard ASCII Font (12 × 24) selected