6. Basic
70
AdminGuide-Voss12-1.docx
■
Parking Configuration
Park Extension:
a code for using call parking.
Unpark Extension:
a code for cancelling call parking.
Start Position:
The first code number for using call Parking with an
extension number.
End Position:
The last code number for using call Parking with an extension
number.
Parking Time:
Maximum waiting time to pick up the parked call. For
example, Parking extension code is *30, start position is 1, end position is 5,
and Unparking code is *31. In this case, an extension user is talking on the
phone with a person outside office. If the user wants to continue the call on
another office room in the building, then the user can use this call parking
feature. For using Call parking feature, the user needs to dial *301 on the
user’s phone and hang up the phone. And go to another office room and dial
*311 on an extension phone, then the user can continue talking to the person
outside office. So, to make call parking, dial Parking ext a random
number among start & end position, and hang up the phone. To re-continue
the parked call, dial unpark ext the random number dialed when
parked the call. And, if a call is parked, another party will hear hold tone.
Figure 6-44. Feature Intercom Config View Frame
■
Intercom Config
Extension:
a code for using intercom feature.
Header:
to setup a header of connection method to connect intercom users.
The default header value is set as no bell sound and connect automatically.
For example, the intercom code is set as *69 and place call to Ext.123 through
intercom feature, then dial *69123.
