WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
77
4.10.10
Read Language PrefWLPR
Command syntax:
AT+WLPR= <index >
Response syntax:
+WLPR: <value>
Read a Language Preference value of EF-LP. The first indexes sould have
the highest priority.
Application to GSM
AT+WLPR?
Read command
GSM to application
+WLPR: 4
OK
Four language preference are available in EF-LP
Application to GSM
AT+WLPR=1
Read first EF-LP index value
GSM to application
+WLPR: 5
OK
Language preference is 5
4.10.11
Write Language PreWLPW
Command syntax:
AT+WLPW=<index >,<value>
Response syntax:
OK or +CME ERROR: <err>
Write a Language Preference value in EF-LP
Application to GSM
AT+WLPW=1,5
Write Lang Pref equal to 5 in EF-LP with index 1
GSM to application
OK
EF-LP correctly updated
4.10.12
Read GPIO value +WIOR
Command syntax:
AT+WIOR=<index >
Response syntax:
+WIOR: <value>
Set the I/O port as an input and read the I/O pin, 0 if the pin is reset, 1 if the
pin is set. Eight I/O ports are available, so the <index> value is between 0
and 7.
Application to GSM
AT+WIOR=4
Read I/O (number 4) value
GSM to application
+WIOR: 0
OK
GPIO number 4 is reset
4.10.13
Write GPIO value +WIOW
Command syntax:
AT+WIOW=<index >,<value>
Response syntax:
OK
Set the I/O port as an output with a I/O pin value, 0 for reset, 1 for set
Application to GSM
AT+WIOW=4,0
Reset I/O (number 4)
GSM to application
OK
GPIO value is written
4.11
Other AT commands
4.11.1
V.25 ter recommandation
Other remaining basic commands are not implemented, so an "ERROR"
string will be sent back.
All commands about modulation control, error control and data
compression are not recognized. An "ERROR" string will be sent back.
4.11.2
GSM 07.05 recommandation
All the remaining commands are not implemented, so an "ERROR" string
will be sent back.
4.11.3
GSM 07.07 recommandation
All the remaining commands are not implemented, so an "ERROR" string
will be sent back.