WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
64
4.7.7
Connected line identification presentation
+COLP
This command allows control of the connected line identification
presentation supplementary service, useful in case of call forwarding of the
connected line.
Command syntax:
AT+COLP=<n>
Response syntax:
+COLP: <n>,<m>
(for AT+COLP?)
Intermediate message:
+COLP: <number>,<type> (after ATD)
<n>: parameter sets/shows the result code presentation status in the TA
0
Disable
1
Enable
<m>: parameter shows the subscriber COLP service status in the network
0
COLP not provisioned
1
COLP provisioned
2
Unknown (no network...)
Application to GSM
AT+COLP=1
Activate COLP
GSM to application
OK
Command valid
Application to GSM
AT+COLP?
Ask for current functionality
GSM to application
+COLP: 1,1
OK
COLP is enabled and provisioned
Application to GSM
ATD146290800;
Outgoing call
GSM to application
+COLP: "0146290928",129
OK
Connected outgoing line presentation
Application to GSM
AT+COLP=0
desactivate COLP
GSM to application
OK
command valid