Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
15
2.2.6
TOUCH LOCKING
The touch panel of Square TMD can be optionally locked and unlocked anytime by
writing a configurable one-bit value to a specific object provided for this purpose. It can
also be done through scene values.
While locked, pressing on the buttons will be ignored: no actions will be performed (and
no LEDs will change their states) when the user touches on any of the controls.
ETS PARAMETERISATION
After enabling “
Touch Locking
” (see section 2.2.5), a new tab will be incorporated into
the tree on the left.
Figure 11
General - Touch Locking.
Control
of this function comprises two simple, non-exclusive checkboxes to select how
the touch panel lock/unlock should be performed:
Figure 12
General - Touch Locking: Control.
Upon the reception of a one-bit value (“
1 bit object
”).
When marked, a specific drop-down list will show up to select which value
should trigger which action (“0 = Unlock; 1 = Lock” or “0 = Lock; 1 = Unlock”).
These values are to be received through object “
[General] Lock Touch
”.
Upon the reception of a scene value (“
Scene object
”).
When marked, two specific textboxes will show up to enter the scene
numbers (1 - 64) that should trigger each action. These values are to be
received through the general “
[General] Scene: Receive
” object.
