7
Change Existing Master Code*
;
1
;
[
__ __ __ __ __
]
;
1
;
[
__ __ __ __ __ __
]
;
[
__ __ __ __ __ __
]
Old (or "Factory") Master Code New Master Code* Confirm New Master Code*
For new locks, follow the "Quick Start" on page 2.
Programming Functions
*
Once the number of digits is selected, it cannot be changed unless all programming is erased and the Factory Default settings are re-loaded
(power must be removed and re-applied as per the "Erase All Programming" procedure found on page 11.
**
Required only if DL5200 is locked.
Add/Change User Codes
;
[
__ __
]
;
Follow the "Quick Start" on page 3.
[
__ __ __ __ __ __
]
;
[
__ __
]
;
[
__ __ __ __ __ __
]
Master Code or New User Code
Manager Code**
Bank (Column)
0-9
User (Row)
1-9
Add/Change Manager Codes
;
[
__
]
0
;
Follow the "Quick Start" on page 3.
Note:
You can also add/change the Manager Code in location
00 by entering the Master Code,
;
2
;
then the new Manager Code.
[
__ __ __ __ __ __
]
;
[
__
]
0
;
[
__ __ __ __ __ __
]
Master Code** New Manager Code
User (Row) Always zero for Managers
Manager Bank (Column) 0-9
Deleting Manager & User Codes
;
[ _ _ ]
;
:
Follow the "Quick Start" on page 3.
[
__ __ __ __ __ __
]
;
[ _ _ ]
;
:
Master or Manager Code**
User (Row) --Always zero for Managers--
0-9
Manager Bank (Column)
0-9
Disable/Enable Users
Enter the Master Code to disable/enable any Manager or User, or enter a Manager Code to disable any User
within the Manager's Bank.
Disable User Number
[
__ __ __ __ __ __
]
;
[
__ __
]
;
(Allow system to relock)
Master or Manager Code Bank/User Number
Enable User Number
[
__ __ __ __ __ __
]
;
[
__ __
]
;
(Allow system to relock)
Master or Manager Code Bank/User Number
