© 2022 ANTZER TECH CO., LTD.
26
//Set the vehicles identification number : customer can set up the ID of the RIFA from
00000~99999, it can help you to track the device by ID and show IDs in your backend
server.
AT+VIN,< ID_Number >
< ID_Number >: vehicles identification number,
Max Len 17 characters
//Set Harsh Acceleration event: set command to activate harsh acceleration detecting
AT+HRAC,<Enable>,< Accelerate _Threshold>,< Duration >
<Enable>: 0:Disable, 1:Enable
< Accelerate_Threshold > Default 100mg, Range is from 30 to 2000mg.
< Duration > Duration in 0.1 seconds, Max Range is 255, Default: 3 (300ms)
//Set Harsh Brake event : set command to activate harsh brake detecting
AT+HRBK,<Enable>,< Brake _Threshold>,< Duration >
<Enable>: 0:Disable, 1:Enable
< Brake _Threshold > Default 300mg, Range is from 30 to 2000mg.
< Duration > Duration in 0.1 seconds, Max Range is 255, Default: 3 (300ms)
//Set Harsh Cornering event : set command to activate harsh corneting detecting
AT+HRCR,<Enable>,< Cornering _Threshold>,< Duration >
<Enable>: 0:Disable, 1:Enable
< Cornering _Threshold > Default 300mg, Range is from 30 to 2000mg.
< Duration > Duration in 0.1 seconds, Max Range is 255, Default: 3 (300ms)
Note: For best performance of harsh driving detection, please make confirm the MicroFit
connector parallel to the heading of vehicle headstock. And keep flat on installation.
