will dial out all number pressed. (1-10 seconds)
-keypad DTMF replay type. When value is “0”, Gateway will transfer DTMF
signal via In-Band type, “1” via RFC2833 type. Users can adjust
the value according to various applications.
-ring
ring time for ring detection(in ms). When Gateway has incoming
call from PSTN side to FXO port, Gateway will determine it is a ring
but not noise only if it is longer than this ring time.
Note:
In Taiwan the ring time of PSTN usually is 1000ms, so if user set
ring time longer that 1000ms, FXO port may not be able to pick up
the call from PSTN side.
-rba
When the calls from the PSTN side, FXO port will off hook if the
ring time is matched with this number.
-eod
It will transfer the DTMF in “#” if users disable the end of dial
function. Users have to press the key pad in “#” if the end of dial
function is enable.
4.2.11 [sip]
This command is for sip configuration related parameters.
-----------------------------------------------------------------------------------------------
usr/config$ sip
sip stack information and configuration
Usage:
-print Display SIP stack information and configuration.
-mode Configure as Proxy mode or Peer-to-Peer mode.
-px Proxy server address. (Proxy IPv4 address or Proxy
dns name)
-domain Second domain name in the URL (if domain name is
not used, specify as null)
-prefix Specify prefix string, use it when the UserID contains
alphabets
-line1 Line 1 is E.164 number of L1.
-line2 Line 2 is E.164 number of L2.
-expire The relative time after which the message expires
(0~65535).
-port SIP local UDP port number (5060~5070). Default :
5060
61
