BelAir20E User Guide
Command Line Interface Basics
April 2, 2012
Confidential
Document Number BDTM02201-A01 Standard
Example
/# cd system
/system# config-restore remoteip 122.45.6.123 remotefile unitA.conf
Common CLI
Commands
In addition to any previously described commands, the following commands are
always available, regardless of your current mode.
Terminating your CLI
Session
exit
Use this command to terminate your own CLI session at any time.
Changing Your
Password
passwd
This command lets you change your current password. First, you are asked to
enter your old password. Then you must enter your new password twice, to
verify that you have typed it correctly.
Note: The specified password is case sensitive, must consist of alphanumeric
characters, must be at least six characters long, and cannot exceed 20
characters.
CAUTION!
If you forget the super-user account password, you may be unable to use all the
unit’s management functions and you may need to reset the unit’s configuration
to factory defaults.
Example
passwd
Old Password:
Enter New Password:
Reenter the Password:
Password updated Successfully
Clearing the Console
Display
clear-screen
This command clears your console display window.
Locking the Console
Display
console lock
This command lock your console display window. You must enter your
password to unlock it.
Displaying the Current
Software Version
version
This command displays the version of the currently running BelAir software
load.
Example
/# version
