Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers
Troubleshooting ATM Errors on the 4-Port ATM ISE Line Card
80
Cisco IOS Release 12.0(27)S
rx_total_resource_errs
The total number of packet reassemblies that
failed due to resource exhaustion. This error
includes rx_buffer_exhaust_errs.
This error is not likely
to occur on the 4-port
ATM ISE line card RX
SAR, because it works
in unidirectional mode
with 64M buffers
available only for
reassemblies.
rx_total_other_errs
The total number of packet reassemblies that
failed because of errors other than resource
exhaustion (not including no-vc cells), including
rx_crc32_errors, rx_packet_abort_errs,
rx_trailer_len_errs, rx_mps_errors, and
rx_reassembly_timeout.
Same value as Input
Errors in the
show
interface
command.
rx_buffer_exhast_errs
The total number of packet reassemblies that
failed because of complete buffer exhaustion on
the SAR. This is included in
rx_total_resource_errs.
This error is not likely
to occur on the 4-port
ATM ISE line card RX
SAR, because it works
in unidirectional mode
with 64M buffers
available only for
reassemblies.
Same value as Ignored
in the
show interface
command.
rx_packet_abort_errs
The number of packet reassemblies that failed
because of receiving a trailer length of 0. This is
included in rx_total_other_errs.
Same value as Abort in
the
show interface
command.
rx_mps_errors
The number of packet reassemblies that failed
because of a packet size greater than the maximum
allowed packet size. This is included in
rx_total_other_errs.
Same value as Giants in
the
show interface
command.
rx_crc32_errors
The number of packet reassemblies that failed
because of an invalid AAL5 CRC32 trailer. This is
included in rx_total_other_errs.
Same value as CRC in
the
show interface
command.
rx_trailer_len_errs
The number of packet reassemblies that failed
because of a packet whose AAL5 trailer had an
invalid trailer length. This is included in
rx_total_other_errs.
rx_reassembly_timeout The number of packet reassemblies that failed
because of timing out before receiving the last cell
of a packet. This is included in
rx_total_other_errs.
Table 9
show controller atm Counters (continued)
Counter
Description
Comments