R U/L/H Series
User Guide, Rev. 00 (May 2015)
37
Examples of usage are shown below.
Prints current state of all ports:
192.168.1.234/actions/gpio_action.php?cmd=readall
Prints current state of physical output number 14:
192.168.1.234/actions/gpio_action.php?cmd=read&pins=14
Sets low state on physical outputs number 11 and 12 (On successful execution no text is printed):
192.168.1.234/actions/gpio_action.php?cmd=write&pins=11,12&state=L
3.2.21
CAN
If you have modem with CAN interface you can configure it under CAN tab. You can set the baudrate
and set forwarding CAN frames to TCP using slcanpty or socketcand.