(see defaults in MIDI Mapping section of default table below)
MIDI CC
Currently, MIDI CC’s are used strictly as on/off triggers and not for continuous
functions. An incoming MIDI CC message triggers the action assigned to it. Currently,
if the action is a playable function such as Move Pitch, the CC value must be >=64 to
trigger. Otherwise, any value will trigger the action.
The list of MIDI CC mappings is the same as the above
MIDI note
mappings.
MIDI PassThru
•
Mode (Off,
Active
, PassThru)
•
MIDI CC# (0-127), default = 88*
•
MIDI CC# Action (Active Low, Active High, Toggle*)
Octave Offset (-2, -1, 0, 1, 2*)
Clocking
Int Clock Enable
(Off,
On
)
Turn internal clock on and off
Int Clock BPM
Set BPM (beats per minute) of internal clock
Ext Clock PPQ
(1, 4, 24)
Set parts per quarter note (PPQ). The setting you choose depends on which device is
sending the clock. For example, typically if sending clock pulses from a computer, you
should use “24”. But if from a drum machine, use “1”.
Audio Output
Attenuation: 0-40 dBPS. (default=6 dB)
Presets
Home Position
(
Root
, Last Note, Ignore)
45
