GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 79
№
Tag
Designation
Parameter
Leng
th,
byte
Length, byte
30 0x76 Thermometer 6 identifier and
measured temperature,
C
2
Analogous to temperature sensor 0.
31 0x77
Thermometer 7 identifier and
measured temperature,
C
2
Analogous to temperature sensor 0.
32 0x90
First iButton key identification
number
4
33 0xc0
CAN-bus data (CAN_A0). Fuel
used by a vehicle from the date
of manufacturing, l
4
Unsigned integer, the value should be divided by 2.
34 0xc1
CAN-bus data (CAN_A1). Fuel
used by a vehicle from the date of
manufacturing, l
4
Lower byte: fuel level, the value should be
multiplied by 0.4.
The second byte: coolant temperature, the value
should be deducted 40.
The third and fourth bytes: engine speed, values
should be multiplied by 0.125.
Example, received: FA 72 50 25.
Fuel level: 100%.
Temperature 74ºC.
Engine speed: 1194 rmp.
35 0xc2
CAN-bus and CAN-LOG data
(CAN_B0). Vehicle`s mileage, m.
4
Unsigned integer, the value should be multiplied
by 5.
36 0xc3
CAN_B1
4
37 0xc4
CAN8BITR0
1
38 0xc5
CAN8BITR1
1
39 0xc6 CAN8BITR2
1
40 0xc7 CAN8BITR3
1
41 0xc8
CAN8BITR4
1
42 0xc9 CAN8BITR5
1
43 0xca
CAN8BITR6
1
44 0xcb
CAN8BITR7
1
45 0xcc
CAN8BITR8
1
46 0xcd
CAN8BITR9
1
47 0xce
CAN8BITR10
1
48
0xcf
CAN8BITR11
1
49 0xd0
CAN8BITR12
1
50 0xd1
CAN8BITR13
1
51 0xd2
CAN8BITR14
1
52 0xd3
The second iButton key
identification number
4
53 0xd4 Total mileage according to
GPS/GLONASS units data, m.
4
Unsigned integer.
54 0xd5
State of iButton keys, identifiers
of which are set by iButton
command.
1
Each bit corresponds to one key.
Example, received: 05 or 00000101 in binary
system. It means that the first and the third keys
are connected.
55 0xd6
Depending on settings:
1. CAN16BITR0
2. the 1
st
vehicle axle load, kg
3. OBD ΙΙ failure code
2
In case the load is on axle, the value is an unsigned
integer; values should be divided by 2.
