manualshive.com logo in svg

Hioki Super megohm SM7110, Instruction Manual

The Hioki Super megohm SM7110 Instruction Manual is crucial for understanding the workings of the product. This comprehensive manual provides step-by-step guidelines for optimal utilization. Download the free manual from our website to enhance your experience with this exceptional product.

Share
Download
background image

2/3

SRT

Function to interact with measuring voltage ON or measurement start. SRT

:STARt

STP

Function to interact with measuring stop (measuring voltage OFF).

STP

:STOP

MTG

Generates manual trigger.

MTG

*TRG

IVS

Setting Measuring Voltage .

IVS <0.1～1000.0>

:VOLTage <Voltage(V)(NR2)>

IVS?

Query response of Measuring Voltage is same as setting.

IVS?

:VOLTage?

PWS

Measuring power source setting.

PWS <0～2>,<0～１>,<0～1>

• Because the instrument does Not support the Noise filter will be igNored.

:CHARge:LIMit:CURRent <1.8mA/5mA/10mA/50mA>
:CHARge:LIMit <ON/OFF>

PWS?

Measuring power source setting query.
Query response in display mode is same as setting.

PWS?

• Because the instrument does Not support the Noise filter will always be "0."

:CHARge:LIMit:CURRent?
:CHARge:LIMit?

DEV

Deviation value display mode setting.

DEV <0～1>,<-9.9999E+30～
9.9999E+30>

• Because the instrument does Not support deviation value display mode, this command will be igNored and will Not
result in a command error.

Not compatible

DEV?

Query response in deviation value display mode is same as setting.

DEV?

• Because the instrument does Not support deviation value display mode, this command will be igNored and will Not
result in a command error.

Not compatible

ELC

Electrode data setting.

ELC <0～1>,<0.0～999.9>,<0.1
～1199.9>,<0.001～
30.000>,<0.01～999.99>

• Because the instrument does Not support SIZE/ACTL selection, the SIZE/ACTL setting will be igNored.

:ELECtric:D1 <diameter(m)(NR2)>
:ELECtric:D2 <diameter of theconter(m)(NR2)>
:ELECtric:T <Thickness (m)(NR2)>
:ELECtric:K <Electrode constact(NR2)>

ELC?

Query response electrode data is same as setting.

ELC?

• Because the instrument does Not support SIZE/ACTL selection, the SIZE/ACTL response will always be "0."

:ELECtric:D1?
:ELECtric:D2?
:ELECtric:T?
:ELECtric:K?

VCM

Selection of auto voltage check execute mode.

VCM <0～1>

:VCHeck:STATe <ON/OFF>

VCM?

Query response of auto voltage monitoring execute mode is same as
setting.

VCM?

:VCHeck:STATe?

CCM

Selection of auto contact check execute mode.

CCM <0～1>

:CONTactcheck:STATe <ON/OFF>

CCM?

Query response of auto contact check execute mode is same as

CCM?

:CONTactcheck:STATe?

WCP

Work capacity setting Capacity of work for open correction value
calculation.

WCP <0.5～99.9>

:CONTactcheck:LIMit <Judgment reference value (F)(NR3)>

WCP?

Query response of work capacity is same as setting.

WCP?

:CONTactcheck:LIMit?

OST?

Executes open correction once and capacity value measured during
open correction is returned as a response.

OST?

• The response range is 0 to 99.999.
• In the event of an error, the query will result in a response of 999.9.

:OPEN?
:OPEN:VALue?

VCK?

Executes voltage check once and returns result of it as a response.

VCK?

:VCHeck?

CCK?

Executes contact check once and returns result of it as a response.

CCK?

:CONTactcheck?

TGM

Trigger mode setting.

TGM <0～2>

• Because the instrument does Not support the "1: Manual trigger" setting, specifying "1" will cause an external
trigger to be set.

:TRIGger <INTernal/EXTernal>

TGM?

Query response of trigger mode is same as setting.

TGM?

• Because the instrument does Not support the "1" setting, the response will be either "0" or "2."

:TRIGger?

RDT?

Measured data query.

RDT? <0～2>

:MEASure?
:MEASure:COMParator?
:MEASure:RESult? <1～255>

CMP

Comparison Measuring mode setting.

CMP <0～1>,<0～2>,<-
9.9999E+30～9.9999E+30>,<-
9.9999E+30～9.9999E+30>

• Because the instrument does Not support mode selection, the "Mode" setting will be igNored.

:COMParator:LIMit <OFF/Upper-limit(NR3)>,<OFF/Lower-limit(NR3)>

CMP?

Query response of Comparison Measuring mode is same as setting.

CMP?

• The "Comparison execution" query will result in a response of "1" if either the upper limit value or lower limit
value is enabled.
• The "Mode" query will always result in a response of "1."

:COMParator:LIMit?

SEQ

Sequential mode setting.

SEQ <0～1>,<0～9>,<0.0～
999.9>,<0.0～999.9>,<0.0～
999.9>,<0.0～999.9>

:SEQuence:STATe <ON/OFF>
:SEQuence:NUMBer <0～9(NR1)>
:SEQuence:TIME <Sequential Measuring No.(NR1)>,<Discharge time
before measurement starts(s)(NR2)>,<Charging (voltage applied) time(s)
(NR2)>,<Measuring Time(s) (NR2)>,<Discharge time after completion of
measurement(s) (NR2)>

SEQ?

Same as set items of query SEQ command message in sequential
mode.

SEQ?

:SEQuence:STATe?
:SEQuence:NUMBer?
:SEQuence:TIME? <Sequential Measuring No.(NR1)>

CNF

Operation environment setting.

CNF <0～1>,<0～1>,<0～1>,<0
～1>

• Specifying "0" for the "Beep tone" parameter will disable all comparator judgment tones.
• Specifying "1: for the "Beep tone" parameter and "0" for the "Beep tone PASS/FAIL" parameter will set the
comparator judgment tone for HI and LO judgments to Type 1 and while disabling the judgment tone for IN
judgments.
• Specifying "1" for both the "Beep tone" parameter and the "Beep tone PASS/FAIL" parameter will disable the
comparator judgment tone for HI and LO judgments while setting the tone for IN judgments to Type 1.

:INTerlock <ON/OFF>
:COMParator:BEEPer
<HI/IN/LO>,<TYPE1/TYPE2/TYPE3/OFF>,<Times>
:KEY:BEEPer <ON/OFF>

CNF?

Query response of operation environment is same as setting.

CNF?

• "Beep tone" queries will result in a response of "0" when all comparator judgment tones are disabled.
• "Beep tone PASS/FAIL" queries will result in a response of "1" when the comparator judgment tone for IN
judgments is Not disabled.

:INTerlock?
:COMParator:BEEPer? <HI/IN/LO>
:KEY:BEEPer?

THL

Histogram display threshold setting.

• The instrument does Not provide a histogram display.This command will be igNored and will Not result in a
command error.

Not compatible

THL?

Query response of threshold is same as setting.

• The instrument does Not provide a histogram display.This command will be igNored and will Not result in a
command error.

Not compatible

RHS?

Histogram counter readout.

• The instrument does Not provide a histogram display.This command will be igNored and will Not result in a
command error.

Not compatible

CHS

Histogram counter clear.

• The instrument does Not provide a histogram display.This command will be igNored and will Not result in a
command error.

Not compatible

Summary of Contents for Super megohm SM7110




















































Reviews:

No comments

Related manuals for Super megohm SM7110

Kawai DG30 Setting Manual preview
DG30
Brand: Kawai Pages: 19
Calculated Industries 6425 User Manual preview
6425
Brand: Calculated Industries Pages: 64
Oakton PH550 Instruction Manual preview
PH550
Brand: Oakton Pages: 16
Olympus EPOCH 650 User Manual preview
EPOCH 650
Brand: Olympus Pages: 362
Olympus 27MG Getting Started Manual preview
27MG
Brand: Olympus Pages: 8
Watts HF scientific AccUView LED Owner'S Manual preview
HF scientific AccUView LED
Brand: Watts Pages: 40
Flowmetrics 922-MFC Installation And Operating Instructions Manual preview
922-MFC
Brand: Flowmetrics Pages: 102
Motortech EasyNOx Operating Manual preview
EasyNOx
Brand: Motortech Pages: 142
FMS RMGZ400B Installation Manual preview
RMGZ400B
Brand: FMS Pages: 12
Baker Hughes Panametrics Aurora H2O User Manual preview
Panametrics Aurora H2O
Brand: Baker Hughes Pages: 92
phase II UTG-2650 Manual preview
UTG-2650
Brand: phase II Pages: 11
PCE Instruments PCE-VT 1000 Manual preview
PCE-VT 1000
Brand: PCE Instruments Pages: 6
Bartec TECH550PRO User Manual preview
TECH550PRO
Brand: Bartec Pages: 38
FuzzDog Quack Machine Quick Start Manual preview
Quack Machine
Brand: FuzzDog Pages: 6
ABQ Industrial TotalCheck Owner'S Manual preview
TotalCheck
Brand: ABQ Industrial Pages: 32
QUNDIS Q heat 5.5 US Operating And Installation Instructions preview
Q heat 5.5 US
Brand: QUNDIS Pages: 6
Anritsu MP1632C Operation Manual preview
MP1632C
Brand: Anritsu Pages: 127
X-Rite Ci62L+RTL User Manual preview
Ci62L+RTL
Brand: X-Rite Pages: 49

Brands by name

Popular brands

Load more brands