Hitachi HUS VM User And Reference Manual Download

Page: 104 / 530

•

Precheck
Specify the checkmode precheck option. It operates checking only (it

does not execute processing even if no error is detected.) This can be

specified at the both line-by-line mode and transaction mode.

The following table shows the overview of execution modes and options of the

configuration setting command.

Table 3-5 Execution modes and options of the configuration setting command (line-by-

line mode)

Command syntax

Syntax

check

Context

check

Configura-

tion check

Command

execution with

no error

Remarks

raidcom <action>

Executed

Not executed

Executed

Default

raidcom <action> -

checkmode precheck

Executed

Not executed

Check only

Table 3-6 Execution modes and options of the configuration setting command

(transaction mode)

Command syntax

Syntax

check

Context

check

Configura-

tion check

Command

execution

with no error

Remarks

raidcom -zt <script file>

Executed

Not executed Executed

Default

raidcom -zt <script file> -

load <work file>

Executed

With configuration

check

raidcom -zt <script file> -

checkmode precheck

Executed

Not executed Not executed

Check only

raidcom -zt <script file> -

load < work file> -

checkmode precheck

Executed

Not executed

With configuration

check
Check only

Detailed description are provided in the following.

Caution:

Observe the following cautions:

•

For <script file>, specify an executable file name.

•

For <script file>, either specify a full path name or store under the c:

\HORCM\etc folder.

•

For <work file>, either specify a full path name or store in the current

directory.

Context check

This check can be performed to ensure consistent content of the created

script file. For example, it can check if the script refers to an ldev_id that is

already deleted in the preceding lines.

3-26

CCI functions

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Related manuals for HUS VM

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Related manuals for HUS VM

Brands by name

Popular brands