MSD-501/502 Command Guide
22
@GTD
Actual output resolution
Function
Acquisition
Format
@GTD
Return value
@GTD, resolution_1 (, resolution_2)
Parameter
resolution_1-2: Actual output resolution
1 = VGA@60 (640x480),
2 = SVGA@60 (800x600),
3 = XGA@60 (1024x768),
4 = WXGA@60 (1280x768),
5 = WXGA@60 (1280x800),
6 = Quad-VGA@60 (1280x960),
7 = SXGA@60 (1280x1024),
8 = WXGA@60 (1360x768),
9 = WXGA@60 (1366x768),
10 = SXGA+@60 (1400x1050),
11 = WXGA+@60 (1440x900),
12 = WXGA++@60 (1600x900),
13 = UXGA@60 (1600x1200),
14 = WSXGA+@60 (1680x1050),
15 = VESAHD@60 (1920x1080),
16 = WUXGA@60 (1920x1200),
17 = QWXGA@60 (2048x1152),
18 = 480i@59.94 (720x480),
19 = 480p@59.94 (720x480),
20 = 576i@50 (720x576),
21 = 576p@50 (720x576),
22 = 720p@50 (1280x720),
23 = 720p@59.94 (1280x720),
24 = 720p@60 (1280x720),
25 = 1080i@50 (1920x1080),
26 = 1080i@59.94 (1920x1080) [Default],
27 = 1080i@60 (1920x1080),
28 = 1080p@50 (1920x1080),
29 = 1080p@59.94 (1920x1080),
30 = 1080p@60 (1920x1080)
Example
@GTD
@GTD,29,26
Acquiring actual output resolution.
OUT1:1080p 59.94Hz; OUT2: 1080i 59.94 Hz
Remarks
If “@GOT / @SOT Output resolution (P.21)” is set to “AUTO-A” or “AUTO-B”, the
actual output resolution is replied. If it is set to a resolution other than “AUTO-A” and
“AUTO-B”, the set resolution is replied.
@GUM / @SUM
Aspect ratio of sink device
Function
Acquisition
Setting
Format
@GUM
@SUM, ch_1, aspect_1 (, ch_2,
aspect_2)
Return value
@GUM, aspect_1 (, aspect_2)
@SUM, ch_1, aspect_1 (, ch_2,
aspect_2)
Parameter
aspect_1-2: Aspect ratio of the sink device
0 = RESOLUTION [Default],
1 = 4:3,
2 = 5:4,
3 = 5:3,
4 = 16:9,
5 = 16:10
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
Example
@GUM
@GUM,4,5
Acquiring aspect ratio of the connected sink device.
OUT1: 16:9; OUT2: 16:10
@SUM,1,4
@SUM,1,4
Connecting 16:9 sink device to OUT1.
Completed normally.
Remarks
－
