MSD-501/502 Command Guide
65
@GSP / @SSP
The number of speakers
Example
@SSP,3,8,0,3,5,6,7
@ERR,1
Setting IN3 speaker configuration to Front Left /
Right, Rear Left / Right, Front Left / Right Center,
Rear Left / Right Center, Front Left / Right Wide.
The number of speakers is 10 which exceeds the
settable value.
Remarks
This command is only for digital input..
@RME
Copying EDID
Function
Save
Format
@RME, out, number (, name)
Return value
@RME, out, number (, name)
Parameter
out: Connector to be loaded
1 = OUT1A, 2 = OUT1B, 3 = OUT2A, 4 = OUT2B
number: Destination COPY DATA number
1 to 8
name: Name of COPY DATA
Up to 10 characters using 20 to 7D from ASCII codes.
You can skip this setting. In this case, only EDID settings are saved without changing
currently saved name.
Example
@RME,1,1
@RME,1,1
Loading EDID data of the sink device connected to
OUT1A and saving it in COPY DATA 1.
Completed normally.
@RME,3,4,800x600
@RME,3,4,800x600
Loading EDID data of the sink device connected to
OUT2A, naming it “800x600” and saving it in
COPY DATA 4.
Completed normally.
Remarks
