PR 5350, Configuration Manual

8

Parameter

Rel. 

Index Description

Type Store Size 

byte

RO / 

R/W Min. Max. Default

FAULT_STATE

28

Active E D Condition set by loss of communication to an output 

block, failure promoted to an output block or a physical contact. 

When Fault State condition is set, Then output function blocks 

will perform their FSAFE actions.

Un-

signed 

8

N

1

RO

1

SET_FSTATE

29

Allows the fault state condition to be manually initiated by 

selecting Set.

Un-

signed 

8

D

1

R/W

1

CLR_FSTATE

30

Writing a Clear to this parameter will clear the device fault state 

if the field condition, if any, has cleared.

Un-

signed 

8

D

1

R/W

1

MAX_NOTIFY

31

Maximum number of unconfirmed notify messages possible.

Un-

signed 

8

SRC

1

RO

8

LIM_NOTIFY

32

Maximum number of unconfirmed alert notify messages allowed.

Un-

signed 

8

SRC

1

R/W

8

CONFIRM_TIME

33

Ms The minimum time between retries of alert reports.

Un-

signed 

32

SRC

4

R/W

640000

WRITE_LOCK

34

If set, no writes from anywhere are allowed, except to clear 

WRITE_LOCK. Block inputs will continue to be updated.

Un-

signed 

8

SRC

1

R/W

1

UPDATE_EVT

35

This alert is generated by any change to the static data

DS-73

D

14

RO

0,0,0, 

0,0,9,0

BLOCK_ALM

36

The block alarm is used for all configuration, hardware, connec-

tion failure or system problems in the block. The cause of the 

alert is entered in the sub code field. The first alert to become 

active will set the Active status in the Status attribute. As soon 

as the Unreported status is cleared by the alert reporting task, 

another block alert may be reported without clearing the Active 

status, if the sub code

has changed.

DS-72

D

13

R/W

0,0,0, 

0,0,0, 

8,0,0

ALARM_SUM

37

The current alert status, unacknowledged states, unreported 

states, and disabled states of the alarms associated with the 

function

block.

DS-74

Mix

8

R/W

0,0,0,0

ACK_OPTION

38

0: Auto ACK Disable

1: Auto ACK Enable

Selection of whether alarms associated with the block will be 

automatically acknowledged.

BIT_

STRING

SRC

2

R/W

0

WRITE_PRI

39

Priority of the alarm generated by clearing the write lock.

Un-

signed 

8

SRC

1

R/W

0

WRITE_ALM

40

This alert is generated if the write lock parameter is cleared.

DS-72

D

13

R/W

0,0,0, 

0,0,0, 

10,0,0

ITK_VER_NR

41

ITK Version Number

This parameter informs which ITK version is the device (for certi-

fied devices only).

Un-

signed 

16

SRC

2

RO

4