MWS_55_e.indb Page 100
Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55
geändert am 04.12.2020 von DO
REINHARDT
System- und Messelectronic GmbH
Fax: 08196/7005 and 1414 email:
wetter@reinhardt-testsystem.de
http://www.reinhardt-wetterstationen.de
8.2.3 Requesting the microcontroller
Get the current data string:
?U <#13>
Read stored data from a defined time & date:
?D <TIME & DATE in format HHMMSSDDMMYY><#13>
Read all stored data:
?D 000000000000<#13>
Interrupt data output:
<#13>
Continue data output after interrupting:
!C<#13>
Cancelling data output:
<#13><#13>
Reading the error memory:
?E<#13>
ERROR: 21 (CO: 966, CC: 901, CL: 0, CA: 0, RoC: 0, RoL: 0)
>13:36:50, 12.10.(285)
20, DISK I/O-failure
>( +33 x)
20, DISK I/O-failure
>13:42:30, 12.10.(285)
20, DISK I/O-failure
>13:43:24, 12.10.(285)
18, I2C line state
The value after ERROR is the complete number of entries in the list (>),
CO: complete number of errors,
CC: number of critical errors (PIO-failure, SPI-initialisation, Memory errors and disk errors),
CL: number of less critical errors (initialisation errors, transmission errors of RTC, ADC, UARTs,
USB, I²C and Ethernet and soft interrupts),
CA: number of annoying errrors (accu charge errors and wrong commands errors),
RoC: reset after number of critical errors (see also !ER),
RoL: reset after number of less critical errors (see also !ER)
Reading and deleting the error memory:
?E CLEAR<#13>
Read GPS-/RS232-Sensor configuration:
?Gx<#13>
e.g. ?G2 (GPS-Data string GPRMC)
===== GPS/RS232: 02 =====
>Source: GPS-GPRMC
|->Separator: ,
|->Position: 5
e.g. ?G7 (Data string with prefix TE)
===== GPS/RS232: 07 =====
>Source: String (prefixed)
|->Prefix: TE
