21
System Menu:
l
Version Information
Firmware version information
l
Update Firmware
Update system firmware
l
Utilities
System tools
n
Factory Default
Set system to factory default
n
Reboot
Reboot system
n
Default EDID
Set EDID to default
n
Console API Command
Run Console API command
l
Statistics
System status
Channel expansion:
To use channel expansion function (CH.0 ~ CH.99)
，
please use
DEVICE MANAGER
program
which included in package for quick setting, or
copy
and
paste
below command in bold at
System
-> Utilities -> Console API Command
to set the transmitter:
Step 1, disable channel setting from rotary switch:
astparam s hostnamebydipswitch n ; astparam s reset_ch_on_boot n
After copy and paste press [Apply] button (notice: do not use
Enter
key)
Set up once only unless you run Factory Default
Step 2, set channel of transmitter:
ast_send_event -1 e_stop_link ; astparam s multicast_ip MULTICAST_IP ; astparam s
hostname_id HOSTNAME_ID ; ast_send_event -1 e_chg_hostname ; astparam save ;
ast_send_event -1 e_reconnect
After copy and paste press [Apply] button (notice: do not use
Enter
key)
Value of MULTICAST_IP and HOSTNAME_ID as below table:
