65
VOLTage[:DC]
DC voltage
VOLTage:AC
AC Voltage
CURRent:DC
DC Current
CURRent:AC
AC Current
RESistance
2-wire resistance
FRESistance
4-wire resistance
FREQuency
Frequency
Period
Period
TEMPerature
Temperature
CAPacitance
Capacitance
The value of <function>
7.2.13.1 {<function>}:NULL:STATe
Description:
Enable or disable the null function for the function specified by <function>. The possible values of
<function> can be found in 7.3.12.
Syntax:
{<function>}: NULL:STATe {ON|1|OFF|0}
{<function>}: NULL:STATe?
Parameters:
{ON|1|OFF|0}
Example:
VOLT:DC:NULL:STAT ON
7.2.13.2 {<function>}:NULL:VALue
Description:
Set a null value for the function specified by <function>. See <7.3.12> for the possible value of
<function>.
To use a null value, you must turn on the null state ({<function>}:NULL:STATe ON).
Specifying a null value disables automatic null selection ({<function>}:NULL:VALue:AUTO OFF).
Syntax:
{<function>}: NULL: VALue {ON|1|OFF|0}
{<function>}: NULL: VALue?
Parameters:
{ON|1|OFF|0}
Example:
VOLT:DC:NULL:VAL 0.214
7.2.13.3 {<function>}:NULL:VALue:AUTO
Description:
Enable or disable null values for the function specified by <function>. See <7.3.12> for possible
values of <function>.
When the automatic reference selection is turned on, the first measurement made is used as the null value for all
subsequent measurements.
{<function>}: NULL: VALue has been set to this value. Automatic null selection will be disabled.
Syntax:
{<function>}: NULL: VALue:AUTO {ON|1|OFF|0}
{<function>}: NULL: VALue: AUTO?
Parameters:
{ON|1|OFF|0}
Example:
VOLT:DC:NULL:VALue:AUTO ON
