16
Tahoe 8216 / Tahoe 8116 Remote Power Management System
·
power
{
on
|
off
}
– enables or disables the Ethernet port,
·
read
[
address
]
– read all or selected MII registers,
·
write
<
address
> <
value
>
– writes to an MII register.
Con
fi
guring the Ethernet transceiver may cause loss of the LAN connection, which in turn may make
it impossible to manage the device remotely.
netstat
Shows a list of TCP connections.
power
Th
e
power
command is used to manage power outlets. With no arguments the list of Power Man-
agement System units is shown with power usage information (active power, current, voltage and
frequency) for each unit.
Th
e following options are available:
·
status
[
outlets
]
– shows the state of all or selected outlets,
·
on
<
outlets
>
– enables selected outlet(s),
·
off
<
outlets
>
– disables selected outlet(s),
·
reset
<
outlets
>
– resets selected outlet(s),
·
rename outlet
<
new name
> <
outlets
>
– assigns a name to outlet(s),
·
rename unit
<
new name
> <
unit
>
– assigns a name to the unit,
·
chown
<
username
> <
outlets
>
– changes owner of outlet(s),
·
watch
<
IP address
> <
outlets
>
– assigns watch address to outlet(s),
·
watch
– shows watch timeouts,
·
watch interval
<
interval
>
– echo request interval (default 5 seconds),
·
watch amount
<
amount
>
– amount of unreplied echo requests before reset is performed
(3 by default),
