Appendix
153
SYSTem:CLOCk:SETDate?
Check the local date according to the set clock
SYSTem:CLOCk:SETTime?
Check the local time according to the set clock
SYSTem:CLOCk:STARt <start_mode>
SYSTem:CLOCk:STARt?
Set or query the clock start method after clock
adjustment
SYSTem:COMMunicate:LAN:GATeway
<ip-address>
SYSTem:COMMunicate:LAN:GATeway?
Set or query the default gateway
SYSTem:COMMunicate:LAN:SUBMask
<subnetmask>
SYSTem:COMMunicate:LAN:SUBMask?
Set or query the subnet mask
SYSTem:COMMunicate:SOCKet:ADDRess
<ip-address>
SYSTem:COMMunicate:SOCKet:ADDRess?
Set or query the IP address of the instrument
SYSTem:DATE <date>
SYSTem:DATE?
Set or query the current time of the instrument
SYSTem:DECLination?
Query magnetic declination angle
SYSTem:DF|DFINder:QUALity:SQUelch?
Query the quality threshold of the measurement
direction
SYSTem:DF|DFINder:STATe <df_state>
SYSTem:DF|DFINder:STATe?
Set or query the switch status of directional
measurement
SYSTem:DF|DFINder:CORRection <df_correction>
Set direction finding calibration
SYSTem:ERRor:ALL?
Query all error codes and their descriptions in the
error queue and zero out the error list
SYSTem:ERRor:CODE:ALL?
Query all error codes in the error queue and zero
out the error list
SYSTem:ERRor:CODE[:NEXT]?
Query the first error code in the error queue and
clear the error from the error list
SYSTem:ERRor:COUNt?
Query error codes in the error queue without
clear the error list
SYSTem:ERRor[:NEXT]?
Query the first error code in the error queue and
its description and clear the error from the error
list
SYSTem:GPS:DATA:AUTO <boolean>
SYSTem:GPS:DATA:AUTO?
Set or query the status of the switch for automatic
update of the instrument clock from GPS
SYSTem:GPS:TIME:OFFSet <time_offset>
SYSTem:GPS:TIME:OFFSet?
Set or query the calibration time synchronized
with GPS time
SYSTem:COMPass:DATA?
Query the electronic compass value and direction
type of the specified electronic compass
SYSTem:GPS:DATA?
Query GPS data information
SYSTem:GPS:VALid:STATe?
Check if GPS is valid
SYSTem:HSCan:CALibrate <calibrate_state>
SYSTem:HSCan:CALibrate?
Set or query the calibration status of the
horizontal scan
SYSTem:HSCan:DATA:CLEar
Clear horizontal scan data
SYSTem:HSCan:DATA:SAVE
Save horizontal scan data
SYSTem:HSCan:STATe <hscan_state>
SYSTem:HSCan:STATe?
Set or query the horizontal scan status
SYSTem:IF:REMote:AGCBypass <Boolean>
SYSTem:IF:REMote:AGCBypass?
Set or query the AGC enable switch status of the
digital IF data stream
