53
Item
Command
Example & Usage
Default
Callback
time
CBTI
CBTI:PROG,1111,5,5,1
To set Callback time & Two-way time, and enable/disable callback
check access code
Parameter 1: Duration, 0 = disable, 1-30 = 1-30 min
Parameter 2: Two-way time, 1-30 = 1-30 min
Parameter 3: callback check access code, 0 = Disable, 1= Enable
5, 5
Auto
check-in
reports
TESTC
TESTC:PROG,1111,720,60
To configure the settings of auto check-in reports
Interval: 0 = disable, 240 = 4 hrs, 360 = 6 hrs, 480 = 8 hrs, 720 = 12
hrs, 1440 = 1 day, 2880 = 2 days, 4320 = 3 days, 5760 = 4 days,
7200 = 5 days, 8640 = 6 days, 10080 = 1 week, 21600 = 15 days ,
43200 = 30 days
Offset time: 60 = 1 hr, 120 = 2 hrs, 240 = 4 hrs, 360 = 6 hrs, 480= 8
hrs, 720 = 12 hrs
720, 60
Location
function
GEOTR
GEOTR:PROG,1111,1,1,5
To configure the location function
Parameter 1: AGPS: 0 = disabled and 1 = enabled
Parameter 2: Reserved, Enter either 0 or 1
Parameter 3: Tracking period: 0 = disabled, 6 = 6 minutes, 7 = 7
minutes, 8 = 8 minutes, 9 =9 minutes, 10 = 10 minutes, 15 = 15
minutes, 20 = 20 minutes, 30 = 30 minutes, 60 = 60 minutes
Geofence
exit track
GEGPS
GEGPS:PROG,1111,60,15
To set Continuous GPS Report function after Geofence Alert
Parameter1: Continuous GPS report period, 0=disabled, 60 - 360 =
60 - 360 mins
Parameter 2: Continuous GPS Report Interval, 0=disabled, 1 - 60 =
1- 60 min(s)
To set the
CID event
code for the
red help
buttons
BTNEV
BTNEV:PROG,1111,100
To set the CID event code sent when Mobile Lite
’s red help button is
pressed.
100 = medical event
101 = personal emergency
120 = panic report
101
To enable/
disable
voice
prompts
during guard
time and
confirmation
beeps
SNDCR
SNDCR:PROG,1111,1,1
To enable/disable voice prompts during guard time and confirmation
beeps
1 = enable
0 = disable
1, 1
To reboot
Mobile Lite
RESET
RESET:PROG,1111
To restart Mobile Lite
--
To check
whether
Mobile Lite
is
operational
ECHO
ECHO:PROG,1111
--
To obtain
Cellular
signal
strength
CSQ
CSQ:PROG,1111
--
