54
Item
Command
Example & Usage
Default
Incoming
call alert
ANSIN
ANSIN:PROG,1111,1,1
To enable/disable ringing sound for incoming call and enable/disable
incoming call check access code
Parameter 1: Ringing sound for incoming call, Disable = 0, Ring
Enable = 1, Ring Enable(Auto-Answer) =2
Parameter 2: Incoming call check access code, Disable = 0, Enable =
1
1
Adjust
Speaker
Volume
SPKVL
SPKVL:PROG,1111,3
Adjusts speaker volume of Mobile Lite
Parameter: 1-5 speaker volume
1 = minimum
5 = maximum
4
Set Caller ID
CALID
CALID:PROG,1111,1,0227942014
Parameter 1: Select Caller ID: 1 = ID #1, 2 = ID #2
Parameter 2: Caller ID number: Enter a number up to 15 digit long
--
Enable /
Disable
Voice
Prompt
VOIEN
VOIEN:PROG,1111,1
Enable/disable mobile voice prompts
Disable = 0, Enable = 1
1
Disable or
enable and
set
GeoFencing
area
GEOFE
GEOFE:PROG,1111,2,4,11,11,22,22,33,33,44,44
Disables, or enables GeoFencing and sets the operational area of
GeoFencing.
Parameter 1: 0-2, 0 = disable, 1 = circle, 2 = polygon
Parameter 2:
a.
If Circle is selected in Parameter 1, enter the location
coordinate of the center of the circle.
Latitude: -90 to 90
Longitude: -180 to 180
b.
If Polygon is selected in Parameter 1, select the vertex
number of the polygon: 3 = 3 vertices, 4 = 4 vertices.
Parameter 3:
a.
If Circle is selected in Parameter 1, enter a radius between
200 and 10,000 meters.
b.
If Polygon is selected in Parameter 1 and the vertex number
determined in Parameter 2, enter the location coordinates
(latitude and longitude respectively).
-
If 3 vertices are selected, enter 3 sets of coordinates.
-
If 4 vertices are selected, enter 4 sets of coordinates.
E.g.: GEOFE:PROG,1111,0 for disable
E.g.: GEOFE:PROG,1111,1,12,123,200 for circle
E.g.: GEOFE:PROG,1111,2,3,11,11,22,22,33,33 for polygon vertex of
3
E.g.: GEOFE:PROG,1111,2,4,11,11,22,22,33,33,44,44 for polygon
vertex of 4
Both Latitude and Longitude accept coordinates of up to 6 decimal
points. Due to the mechanics of GPS positioning, the 6th decimal
point may deviate slightly from the entered value. However, the actual
position is affected very slightly.
--
GPS Tracker
Report
TRACR
TRACR:PROG,1111,0
Parameter: 0 = Disable, 1 = Enable
1
Speech
Report Ack
Setting
RPACK
RPACK:PROG,1111, 1
Parameter: 0 = Off hook, 1 = Any DTMF
0
