15
If user want to enable local video preview function, there are two ways:
Input number j+WIN to select window and click ENTER button, click ENTER button
again to close current preview.
Input number j+WIN.
Select one window and click
（
NEXT
）
or
（
PREV
）
, user may increase or decrease
current video channel number and then output it to current select window.
Note
Input number j+WIN+0+CAM, user may stop dynamic decode function of window j.
Output decoded video group to the video wall (Input group->output channel).
The function of the decoder is to output a selected group via the output decoded channel.
Detailed function:
When the channel n in the group is smaller than the output channel window amount
m, it is to decode dynamically. System outputs the input channel from the group to
display in the windows respectively.
When the channel
n
in the group is larger than the output channel window amount m,
it is to realize the tour function from group to screen. The output channel window
m
is
one output group and system decodes and outputs the input channel
m
by once.
System repeats the output until the remaining input channel amount is smaller than
the
m
.
Please follow the steps listed below.
1) Input i+MON, it is to select output channel i.
2) Input j+CAM-G, it is to output current input group j via the output channel i.
Decoded video group to the video wall (Input group->output window)
User may refer to the above contents for detailed information. The difference is that user
need to select a window for the output channel. User need to set the input channel of the
input group to one window of the output channel to enable the tour function. If there is only
one input channel, it is just like the dynamical decode in the output window.
Please follow the steps listed below.
1) Input i+MON, it is to select the output channel i.
2) Input j+WIN, select the window j for current output channel.
3) Input k+CAM-G, select to output the current input group k to the output channel
window j to enable the tour function.
Decode video to the video wall (Input group->output group)
User may refer to the above contents for detailed information. If the channel amount n in
the input group is smaller than or equal to the output window amount
m
in the output
group (for example, output group 1 has two output channels, and each output channel has
4-window. There is total 8-window. Here user need to compare
n
and 8.). It is to decode
the signal from the input channel to the output channel respectively. If the
n
is larger than
m
, system decodes and outputs
m
output channel until the remaining input channel is
smaller than
m
.
Please follow the steps listed below.
