5-18
Field
Description
Interface
Interface connecting to the neighbor
Circuit Id
Circuit ID
State Circuit
state
HoldTime
Holdtime
Within the holdtime if no hellos are received from the neighbor, the neighbor is
considered down. If a hello is received, the holdtime is reset to the initial value.
Type
Circuit type
L1 means the circuit type is Level-1 and the neighbor is a Level-1 router.
L2 means the circuit type is Level-2 and the neighbor is a Level-2 router.
L1(L1L2) means the circuit type is Level-1 and the neighbor is a Level-1-2
router.
L2(L1L2) means the circuit type is Level-2 and the neighbor is a Level-1-2
router.
PRI
DIS priority of the neighbor
Area Address(es)
The neighbor’s area address
Peer IP Address(es)
IP address of the neighbor
Uptime
Time that elapsed since the neighbor relationship was formed.
Adj Protocol
Adjacency protocol
# Display IS-IS neighbor statistics information.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 0/0 0/0
LAN Level-2 0/0 0/0
P2P 3/0 0/0
Table 5-9 display isis peer statistics
command output description
Field
Description
Type
Neighbor type:
z
LAN Level-1: Number of Level-1 neighbors whose network type is broadcast.
z
LAN Level-2: Number of Level-2 neighbors whose network type is broadcast.
z
P2P: Number of neighbors whose network type is P2P.