9-33
Parameters
None
Description
Use the
log-peer-change
command to enable the logging on neighbor state changes.
Use the
undo log-peer-change
command to disable the logging.
With this feature enabled, information about neighbor state changes of the current OSPFv3 process
will display on the configuration terminal.
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing (OSPFv3 view)
Syntax
maximum load-balancing
maximum
undo maximum load-balancing
View
OSPFv3 view
Default Level
2: System level
Parameters
maximum
: Maximum number of equal-cost routes for load-balancing. The number ranges from 1 to 8.
The argument being set to 1 means no load balancing is available.
Description
Use the
maximum load-balancing
command to configure the maximum number of equal-cost routes
for load-balancing.
Use the
undo maximum load-balancing
command to restore the default.
By default, the maximum number of equal cost routes for load balancing is 8.
Examples
# Configure the maximum number of equal-cost routes for load-balancing as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6
ospfv3
Syntax
ospfv3
[
process-id
]
undo ospfv3
[
process-id
]
