1-13
Table 1-3 display ip routing-table statistics
command output description
Field
Description
Proto
Origin of the routes.
route
Number of routes from the origin
active
Number of active routes from the origin
added
Number of routes added into the routing table since the router started up or the routing
table was last cleared
deleted
Number of routes that have been deleted. These routes will be removed permanently
after a period.
freed
Number of routes that have been removed permanently.
Total Total
number
display ipv6 routing-table
Syntax
display ipv6 routing-table
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ipv6 routing-table
command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference
: 0
Interface : InLoop0 Cost
: 0