Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
56
4K Diva – User Manual
#diva set analogvolume x
where x is [-30 to +10]
Sets the analog L/R audio jack output volume in dB.
Ex. #diva set analogvolume -10
#diva set analogbass x
where x is [-10 to +10]
Sets the analog L/R audio jack output bass level in dB.
Ex. #diva set analogbass 5
#diva set analogtreble x
where x is [-10 to +10]
Sets the analog L/R audio jack output treble level in dB.
Ex. #diva set analogtreble -2
#diva set reboot
Reboots the unit, does not clear any settings
#diva set factoryreset x
where x is [1, 2, 3]
1 = Erase all settings but retain the custom EDID tables
2 = Erase custom EDID tables but retain other settings
3 = ERASE all settings and EDID tables
Ex. #diva set factoryreset 3
#diva set jvcmacro x
where x is [on / off]
Enables / disables JVC macro sending
Ex. #diva set jvcmacro on
#diva set jvcmacrosync x
where x is [on / off]
Enables / disables JVC macro sending on every sync instead of just at start once
Ex. #diva set jvcmacrosync on
#diva set jvcmacrodelay x
where x is [0 - 255]
Sets the delay between a mode change and sending the macro command via RS232
Ex. #diva set jvcmacrodelay 25
#diva set jvcmacrohdr10mode x
where x is [0 - 4]
0 = auto
1 = ignore metadata
