28
emu3/emu3ACO Operation Guide
Version 2.1
Telnet commands
Logging in
Log in using a set of user credentials configured for the unit (e.g. admin).
Notes on addressing units
The reference number used in the Telnet commands to address an emu3 unit refers to its position in the Web
Interface display i.e. the first unit in the list is unit 01, the second is 02 and so on.
For the purposes of backwards compatibility, if the unit reference is omitted from a parameter which is expected to
have a unit prefix then it is assumed that the command refers to unit 01.
e.g. a reference to the parameter o02 is equivalent to u01o2.
Note:
In all cases a leading “0” may be omitted e.g. u1o2 is equivalent to u01o02.
read status command
This command returns status information from a numbered switch outlet.
Syntax:
read status outlet_ref option
Parameters:
Parameter
Value/Options
Description
Example result
outlet_ref
uXXoYY
Command affects power outlet number YY of
unit XX
option
format
Request formatted string of Power Outlet
Status
Outlet XX on|off|pending
simple
Request simple string of Power Outlet Status
on|off|pending
Example commands:
read status u01o08 simple
read status u03o10 format
Error messages:
Message
Description
Invalid command or exceed max command length
Incorrect command syntax
Not Supported
Outlet Number out of range