iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 50 / 121
9.2
Device (DEV)
Device settings menu contains registers responsible for global settings. Change of any of
particular parameter has influence on different modes and functions implemented in the
Room Panel. Some of the parameters refer to time settings such as Time format Enter Menu
time, Exit Menu Time or Refresh Time. In the Device settings menu user can switch the
beeper off or disable background illumination of LCD Display or Key Pad. All available
parameters are presented in the table below:
Parameter
number
Modbus
address
Dec
address
Hex
address
Register Name
Access
Description
2.1
40205
204
0xCC
DEVICE CONFIGURATION bit 0
BEEPER
Read &
Write
Memory
0-inactive
1-active(def)
2.2
40205
204
0xCC
DEVICE CONFIGURATION bit 1
TIME_FORMAT
Read &
Write
Memory
0-24h(def)
1-12h
2.3
40205
204
0xCC
DEVICE CONFIGURATION bit 2
TEMPERATURE_UNIT
Read &
Write
Memory
Not supported
2.4
40205
204
0xCC
DEVICE CONFIGURATION bit 3
BACKGROUND_ILLUMINATION_LCD_ACTIVE
Read &
Write
Memory
0-inactive
1-active(def)
2.5
40223
222
0xDE
DEVICE CONFIGURATION bit 4
BACKGROUND_ILLUMINATION_KEYPAD_ACTIVE
Read &
Write
Memory
0-inactive(def)
1-active
2.6
40028
27
0x1B
ENTER_MENU_TIME
Read &
Write
Memory
By default 2 sec.
2.7
40224
223
0xDF
EXIT_EDIT_TIME
Read &
Write
Memory
By default 5 sec.
2.8
40225
224
0xE0
EXIT_MENU_TIME
Read &
Write
Memory
By default 10 sec.
2.9
40217
216
0xD8
REFRESH_TIME
Read &
Write
Memory
By default 2 sec.