EDID
UPDATE
Update from TX default or monitor of RX
Transmitter does not support
parameter SELECT
SELECT ?
Status of EDID setting
SELECT [ 0~3 ]
0=HDMI, 1=DVI, 2=VGA, 3=Loop Out
HDMI
CTRL ?
Status of HDMI 5V control
Transmitter does not support
parameter CTRL
CTRL [ ENABLE | DISABLE ]
Enable/disable HDMI 5V control
HDCP ?
Status of HDCP Always On
HDCP [ 0~2 ]
0=Disable, 1=HDCP 1.4, 2=HDCP 2.2
SCREEN
?
Status of screen settings
Transmitter does not support this
command
[ ON | OFF ]
Screen on/off
SAVER ?
Status of screen saver
SAVER [ ENABLE | DISABLE ]
Enable/disable screen saver
OPTION ?
Status of behavior after screen off
OPTION [ 0~2 ]
Set behavior after screen off
OSD
ON “string”
Show “string” on screen (30 seconds)
Transmitter does not support this
command
OFF
Turn off OSD immediately
OFF ?
Status of OSD duration (ms)
OFF [ 0~65535 ]
Set duration of OSD (ms)
ROUTING
?
Status of free routing
Transmitter does not support
parameter LOAD and SAVE
[ ENABLE | DISABLE ]
Enable/disable free routing
LOAD [ 0~3 ]
Load free routing setting
SAVE [ 0~3 ]
Save free routing setting
DEVICE
?
Status of device number
Transmitter does not support this
command
[ 0~999 ]
Set device number
GROUP
?
Status of group number
Transmitter does not support this
command
[ 0~99 ]
Set group number
PARTY
?
Status of party number
Transmitter does not support this
command
[ 0~99 ]
Set party number
NET
RECONNECT
Reconnect with TX/RX
Transmitter does not support
parameter DISCONNECT
DISCONNECT
Disconnection (keep routing channel)
STOP
Stop all connection (Include routing channel)
MULTICAST ?
Status of multicast
MULTICAST [ ENABLE | DISABLE ]
Disable=unicast
JUMBO_FRAME ?
Status of Jumbo Frame
JUMBO_FRAME [ ENABLE | DISABLE ]
Enable/disable Jumbo Frame
IP_MODE ?
Status of IP mode
IP_MODE [ 0~2 ]
0=Auto, 1=static, 2=DHCP
IP ?
Status of static IP address
IP [ xxx.xxx.xxx.xxx ]
Set static IP address
NETMASK ?
Status of subnet mask (static IP mode)
NETMASK [ xxx.xxx.xxx.xxx ]
Set subnet mask (static IP mode)
GATEWAY ?
Status of gateway (static IP mode)
GATEWAY [ xxx.xxx.xxx.xxx ]
Set gateway (static IP mode)
QUERY
IP
Status of current IP address
MAC
Status of MAC address
RESOLUTION
Status of video resolution
VERSION
Status of firmware version
AUXILIARY
BAUD ?
Status of auxiliary baudrate
BAUD [ 0~9 ]
0=115200, 1=57600, 2=38400… 9=300
NEWLINE ?
Status of auxiliary newline
NEWLINE [ 0~3 ]
0=Linux, 1=Windows, 2=Mac, 3=Other
TRIGGER ?
Status auxiliary trigger
TRIGGER [ 0~3 ]
0=Linux, 1=Windows, 2=Mac, 3=Other
VERSION
Status of auxiliary versions
LOAD
DEFAULT
Load default to current setting
Before loading defaults, use
SAVE to save current settings
[ 0~3 ]
Load system setting from bank 0~4
SAVE
Save current system setting
[ 0~3 ]
Save system setting to bank 0~4
REBOOT
Reboot
CONSOLE
string
Run console API command
For debug use, if you input
incorrect value this will cause
unpredictable results, for
professional installers only.
SYSTEM
[ 0~255 ] ?
Status of system function
[ 0~255 ]
Set system function
APPLICATION
[ 0~255 ] ?
Status of application function
[ 0~255 ]
Set application function
18
