xlvii) GetSilencerMonth
Requests the month during which the next exhaust silencer change is due,
the returned value will be from 1 to 12.
xlviii) GetSilencerYear
Requests the year during which the next exhaust silencer change is due,
the returned value will be from 0 to 99.
N.B.
Items xlii), xliii), xliv) and xlv) will return the last entered value if the
dryer is configured as having no Active Exhaust silencers (AES) fitted.
xlix) GetSizingDewpoint
The outlet dewpoint which the dryer has been sized to deliver will be
returned in milliCelsius.
l)
GetSizingPressure
The inlet pressure which the dryer has been sized to operate at will be
returned in millibar (gauge).
li)
GetSizingTemperature
The inlet temperature which the dryer has been sized to operate at will be
returned in milliCelsius.
lii)
GetStatus
The dryer status is displayed. A list of the status text strings is given in
“DHPNDRL1V3_3.cod” under [STATUS].
liii)
GetTemperature
The inlet temperature to the dryer bank will be returned in milliCelsius.
liv)
GetTemperatureAFS
A “1” will be returned if Automatic Fault Shutdown (AFS) on the inlet
temperature is activated.
lv)
GetTotalEnergySavings
Requests the energy savings achieved since commissioning, the returned
value will be from 0 to 100.
N.B.
Energy savings will only be achieved if the dryer is fitted with
Dewpoint Dependent Switching (DDS).
25
