Parameter Reference Guide
Polycom, Inc.
57
Protocol
The transport protocol for the specified port range in this rule. It
can take one of the following values:
•
TCP
: TCP only
•
UDP
: UDP only
•
Both
: TCP and UDP
StartingPort
Starting port number of the forwarded port range.
EndingPort
Ending port number of the forwarded port range. If it is the same
as
StartingPort
, only the one port equal to the
StartingPort
is
forwarded.
ServerIPAddress
The LAN side IP address to forward the packet to when it is
received at a port on the WAN side within the port range in this
rule with matching transport protocol.
QoS Parameter Guide
Parameter
Description
Default Setting
QoS General Setting
Enable
Enables QoS Service (take effect in router mode only).
No
UpStreamBandwidth
The total upstream bandwidth in kbps.
2048
RestrictedBandwidth
The guaranteed bandwidth for Restricted class traffic in kbps.
512
Priority Class Bandwidth Allocation
High
The guaranteed uplink bandwidth allocation weight for High
Priority class traffic. It must be a value between
1
and
10
.
5
Medium
The guaranteed uplink bandwidth allocation weight for
Medium Priority class traffic. It must be a value between
1
and
10
.
3
Low
The guaranteed uplink bandwidth allocation weight for Low
Priority class traffic. It must be a value between
1
and
10
.
2
DSCP to Priority Class Mapping
N
(
N
= 0 – 63)
The priority class to be assigned to the packet that has the
DSCP code equal to
N
in the IP header. Choose from:
•
Restricted
•
High
•
Medium
•
Low
Restricted class has the highest priority.
For
N
= 8, 10,
12, or 14, the
default is
Low
.
For
N
= 48 or
56, the default
is
High
.
For all other
DSCP codes,
the default is
Medium
.
Port Forwarding Parameter Guide
Parameter
Description
Default Setting
