Parameter Reference Guide
Polycom, Inc.
75
X_ProxyClientConfig
(cont.)
“Monitor VM”
: Monitors if new voicemail is
available in a mailbox. Requires a
va
attribute with
the target mailbox ID, such as
“00”
,
“01”
, … as the
value.
“Monitor Park”
: Monitors a parking lot partition.
Requires a
va
attribute with the target parking lot
partition mask, such as
“0*”
,
“1*”
,
“**”
, … as the
value.
“Monitor Night Mode”
: Monitors the system’s
day/night mode status. No
va
attribute required.
“Auto Night Mode”
: Monitors if the system’s auto
day/night mode switching feature is active. No
va
attribute required.
“Sign On/Off”
: Lets user sign on/off an extension.
Requires a
va
attribute with the extension number to
sign on/off as the value, such as
“101”
.
•
va
: Required if the function code requires it. This attribute
must be located somewhere between two
bn
attributes.
•
la
: Optional. If present, it must be somewhere between
two
bn
attributes. A string label to display on the phone
screen next to the current function key. For example
“$USER”
,
“Park”
,
“Night”
. It should be no longer than
7 characters due to space limitation. This attribute does
not apply for a sidecar button.
Other than
“Ext 1”
and the generic
“Speed Dial”
function, all the other button functions are only applicable if
the service installed on this SP is from an OBiPLUS system.
This parameter is useful only if the
X_Proxy
parameter is
enabled. In that case, the device provides a configuration file
based on the attributes given in this parameter, upon
request from an IP phone with the matching MAC address.
The IP phone must be installed on the LAN side of the
device and must be one of the following make/models:
•
Cisco/SPA303
•
Cisco/SPA504G
•
Cisco/SPA508G
•
Cisco/SPA509G
•
Cisco/SPA525G
X_AcceptResync
Controls whether to accept a SIP NOTIFY request with
event=resync to trigger a reboot of the device (so it can
download new f/w or configuration upon boot up). Choose
from:
•
no
: Do not accept resync trigger
•
yes with authentication
: Accept after challenging
the sender
•
yes without authentication
: Accept without
challenging the sender
yes without
authenticati
on
SP
n
Services Parameter Guide
Parameter
Description
Default Setting
