Parameter Reference Guide
Polycom, Inc.
85
DigitMap
Restricts the numbers that can be dialed
or called from the Phone port. If the caller
dials a number that is not allowed by the
digit map, the device plays a SIT tone
followed by a short error message to let
the caller know that the dialed number is
invalid.
See the
Trunks, Endpoints, and Terminals
section
for a description of the syntaxes to
specify a digit map.
([1-9]x?*(Mpli)|[1-9]S9|
[1-9][0-9]S9|911|**0|***|
#|##|
**70(Mli)|**8(Mbt)|**81(M
bt)|
**82(Mbt2)|
**1(Msp1)|**2(Msp2)|
**3(Msp3)|**4(Msp4)|
**9(Mpp)|(Mpli))
OutboundCallRoute
After the caller dials a number that is
acceptable according to the
DigitMap
, the
device uses this outbound call routing rule
to determine that service to make this call
with. If no appropriate call route is found,
the device plays a SIT tone followed by a
short error message to let the caller know
that there is no call route to place the call.
See the
Trunks, Endpoints, and Terminals
section
for a description of the syntaxes to
specify this parameter.
For OBi200/OBi300:
{([1-9]x?*(Mpli)):pp},
{(<##:>):li},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
For OBi202/OBi302 PHONE2:
{([1-9]x?*(Mpli)):pp},
{(<##:>):li},
{(<#:>):ph},
{(<**70:>(Mli)):li},
{(<**82:>(Mbt2)):bt2},
{(<**81:>(Mbt)):bt},
{(<**8:>(Mbt)):bt},
{**0:aa},{***:aa2},
{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},
{(<**3:>(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},
{(<**9:>(Mpp)):pp},
{(Mpli):pli}
Phone Port Parameter Guide
Parameter
Description
Default Setting
