52
10. Update the software with CF card
Format the program of the controller, then download the last software and copy to
CF:\SUP2420\APP2420.SUP, inset the CF card to the seat, press FIXTURE and
OVERRIDE and number button 15 then Power on afresh until the information show on
the LCD display, the controller will test if the CF card stick well and then update the new
software, it will cost about 20 seconds, please don’t move the CF card or cut the power
in order to avoid update frustrated and damage the CF card.
Save the program first, or updating the software may lead the memory program
useless. Please refer to “Write CF card” and “Read CF card” to operate.
NOTICE:
The format of the CF card should be FAT12 or FAT16, but not FAT32 and NTFS, be sure there is no
long-name files under the root directory (the amount of the name below 8), the character must be start with let
-
ters, and compose with letters or number or underline.
11. PROFILE Create notice
10.1 PROFILE.CIF (as the profile cyclostyle)
The finished file should use a short name below 8 characters, All use capital letters and suffix with CIF transito
-
rily. (IL-2420 controller nonsupport long file name) or the controller can’t read up the profile information.
10.2 IM-1200S.CIF is the profile of ACME IM-1200S
10.3 Enactment special code, so the controller should distil some channel characteristic to
manage.
; ARRT CODE
; D = DIMMER
DIMMER
; P = PAN
PAN
; PF = PAN FINE
PAN FINE in 16 channel mode
; T = TILT
TILT
; TF = TILT FINE
TILT FINE in 1 6 channel mode
; G = ALL GOBO CORRELATION CHANNELS
transfer all gobo correlation channel to preset gobo
; C = ALL COLOUR CORRELATION CHANNELS transfer all colour correlation channel to preset gobo
; N = ETCAETERAS CHANNELS
else channels should be signed N
10.4 The channel display message should be no more than 4 capital letters or underline or
number, and must be bracket with double quotation marks. Don’t replace by blank if shorter 4
character.
You’d better input in English mode, ensure all the input characters are DBC but not SBC case
q
“DIM”
;right
w
“DIM ”
;wrong for the blank
e
“dim” “DIm”
;wrong for the lowercase
r
‘ ‘DIM’ ’
;wrong for the SBC double quotation marks
10.5 Don’t change the group which contain”;********”
10.6 Store the profile that you want to input to the controller under the root directory of CF
card.
EXP:
If CF card is disk F, then the file input route should be “F:\DIR2402\IM-1200S”
10.7 The format of CF card should be FAT16 but not FAT32.