20
CORRESPON-
DING DTMF
CHARACTER
COMMANDS
ITEM
COMMAND
EXAMPLE & USAGE
DEFAULT
49#
Supervision
SUPPR
PROG 1111 SUPPR:0
To set the supervision timer
0=Disable, 1=4 Days, 2=5 Days, 3=6 Days
4=7 Days, 5=8 Days, 6=9 Days, 7=10 Days
0 = Disable
53#
Prompt
LANGU
PROG 1111 LANGU:0
To set voice prompt language.
0=English, 1=Arabic (Reserved), 2=Spanish (Reserved),
3=Russian (Reserved), 19=other (Reserved), 20=Beep
0 = English
54#
Fall Sensor
Sensitivity
FALSN
PROG 1111 FALSN:3
To set Fall Sensor Sensitivity,
1 ~ 5 Levels, 1=Lowest Sensitivity, 5= Highest Sensitivity
3
63#
Set speaker
volume
SPKVL
PROG 1111 SPKVL:2&5 (4G/LTE)
To set speaker volume in two-way mode for 4G/LTE.
The sequence is: Mode & + Speaker Volume
Communication Mode Number: 1 digit ( 2: Two-way)
Speaker Volume: 1 digit (Number 1-5). The higher the
value, the louder the voice.
Two-way:2
Volume
Level: 5
64#
Set
microphone
sensitivity
MICSN
PROG 1111 MICSN:1-5
To set the microphone volume with a number, ranging
1-5. The higher the value, the wider range the
sound received. Default is set as (3).
Note: only can be adjusted in the two-way mode.
Mic: 3
66#
Set guard
time for fall
sensor
FAGUD
PROG 1111 FAGUD
：
15
To set the guard time delay time for fall sensor.
00=Instant, 01-99=1-99 seconds
15 sec
77#
Speech
report ack
SPACK
PROG 1111 SPACK:1
Speech report acknowledgement.
0 = Any DTMF On, 1 = OFF-HOOK
Any DTMF
---
IP address
TCIP1
PROG 1111 TCIP1:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
_
---
IP address
TCIP2
PROG 1111 TCIP2:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
_
---
Port number
PORT1
PROG 1111 PORT1:3301
To set/change the port number for the IP address
Input 1 to 5 digits
_
---
Port number
PORT2
PROG 1111 PORT2:3301
To set/change the port number for the IP address
Input 1 to 5 digits
_
---
GPRS/IP
account
number
IPAC1
PROG 1111 IPAC1:1052
To set/change the GPRS/IP account number (4-10digit)
_
---
GPRS/IP
account
number
IPAC2
PROG 1111 IPAC2:1052
To set/change the GPRS/IP account number (4-10digit)
_
---
Access
Point Name
APNSR
PROG 1111 APNSR:INTERNET
To set/change the Access Point Name (APN server, 31
digits)
_
---
User name
GPUSE
PROG 1111 GPUSE:123
To set/change the user name
Input 1 to 15 alphanumeric characters
No user
name
