18
[file_name]
Example
MCT-RACK# firmware upgrade ftp 192.168.1.198 HS_0600_file.bin edge10 abcxyz
MCT-RACK# firmware upgrade tftp 192.168.1.198 HS_0600_file.bin
2.5.3 Ping Command
Command
Parameter
Description
MCT-RACK> ping
[A.B.C.D] [-s size
(1-65500)bytes] [-t
timeout (1-99)secs]
[A.B.C.D]
Enter the IP address that you would like to ping.
[-s size (1-
65500)bytes]
Enter the packet size that would be sent. The
allowable packet size is from 1 to 65500 bytes.
(optional)
[-t timeout (1-99)
secs]
Enter the timeout value when the specified IP
address is not reachable. (optional)
Example
MCT-RACK> ping 8.8.8.8
MCT-RACK> ping 8.8.8.8
–s 128 –t 10
2.5.4 Reload Command
To restart the Chassis, enter the reload command.
Command / Example
MCT-RACK# reload
2.5.5 Write Command
To save running configurations to startup configurations, enter the write command. All
unsaved configurations will be lost when you restart the Chassis.
Command / Example
MCT-RACK# write
2.5.6 Configure Command
You can enter Global Configuration Mode only from Privileged Mode. You can type in
“configure” or “config” to enter Global Configuration Mode. The display prompt will change
from “MCT-RACK#” to “MCT-RACK(config)#” once you successfully enter Global
Configuration Mode.
Command / Example
MCT-RACK# config
MCT-RACK(config)#
MCT-RACK# configure
MCT-RACK(config)#
