D-Link DWS-1008 User Manual
1
To enable or disable cipher suites, use the following commands:
set service-profile
name
cipher-ccmp {enable | disable}
set service-profile
name
cipher-tkip {enable | disable}
set service-profile
name
cipher-wep104 {enable | disable}
set service-profile
name
cipher-wep40 {enable | disable}
To enable the 40-bit WEP cipher suite in service profile wpa, type the following command:
DWS-1008#
set service-profile wpa cipher-wep40 enable
success: change accepted.
After you type this command, the service profile supports TKIP and 40-bit WEP.
Note: Microsoft Windows
®
XP does not support WEP with WPA. To configure a service profile to provide
WEP for XP clients, leave WPA disabled and see “Configuring WEP”.
Changing the TKIP Countermeasures Timer Value
By default, MSS enforces TKIP countermeasures for 60,000 ms (60 seconds) after a second MIC failure
within a one-minute interval. To change the countermeasures timer value, use the following command:
set service-profile
name
tkip-mc-time
wait-time
To change the countermeasures wait time in service profile wpa to 30 seconds, type the following
command:
DWS-1008#
set service-profile wpa tkip-mc-time 30000
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......
