GMC-I Gossen-Metrawatt GmbH
73
Comment
•
As opposed to
*SAV
, the
STORE
command allows for
significantly faster and more direct programming of the
required memory locations for a sequence.
•
The txt parameter is optional from this point on. If the txt
parameter is omitted, the comma between the last numeric
parameter and the txt parameter is omitted as well. The NC txt
parameter is treated like the non-transmitted txt parameter.
•
Response to the txt parameter
Setting query
Recall data for address n from
sequence or limit value memory:
Programming
Query command: a)
STO
RE
?
b)
STO
RE
?
n
c)
STO
RE
?
n1,n2
Response string:
a)/c) STORE
AAA/n1, v1, v2, v3, txt; ... ;
STORE
EEE/n2, v1, v2, v3, txt
b)
STORE
n, v1, v2, v3, txt
Length:
Case b): 37 characters, fixed
Case a)/c): ((n2-n1+1)x38)-1 character
Parameter:
n, v1, v2, v3, txt
(nnn,+000.000,+000.000,00.00,CLR)
(memory address, USET, ISET TSET,
CLEAR / no function)
If the response is CLR, the queried
memory location is empty.
Example
b) (HP Basic):
OUTPUT 713; "STORE? 14"
ENTER 713; A$
DISP A$
→
Display:
STORE 014,015.000,003.000,09.70, NC
Example
a)/c)
(HP Basic (in case a), start address 11 and stop address 13 apply):
a) OUTPUT 713; "STORE?"
c) OUTPUT 713; "STORE? 11,13"
ENTER 713; A$
DISP A$
→
Display:
STORE 011,+015.000,+003.000,09.70, NC;
STORE 012,+010.000,+004.000,01.50, NC;
STORE 013,+020.000,+007.000,02.30, NC
Example
d)
(HP Basic):
OUTPUT 713; "STORE? 11,13,tab"
ENTER 713; A$
DISP A$
→
Display:
STORE
➝
011
➝
+015,000
➝
+003,000
➝
09,70
➝
NC
↵
STORE
➝
012
➝
+010,000
➝
+004,000
➝
01,50
➝
NC
↵
STORE
➝
013
➝
+020,000
➝
+007,000
➝
02,30
➝
NC
↵
Significance of delineators:
➝
= ASCII 09h tabulator
↵
= ASCII 0Ah line feed
TDEF, TDEF? – Default Time for SEQUENCE Function
Functions
The TDEF parameter setting defines the dwell time default setting
for a voltage-current value pair to be recalled. TDEF is used
instead of TSET if TSET has not been set to any specific value, or
if it has been set to 00.00 [s].
Applications
Use of TDEF is advantageous if one or several identical dwell
times occur within a given sequence whose values need to be
changed frequently.
Syntax
TDEF
value
Parameter
Value
Parameter type: real number
Default setting after RESET (*RST): unchanged
a) Manual Operation
b) Programming
Set
Setting command:
TD
EF
value
Example (HP Basic):
OUTPUT 712;"TDEF 5.0"
!Default time: 5 seconds
Setting query
Query command:
TD
EF
?
Response string:
TDEF
value
Parameter format
value
:
nn.nn
Fixed response string length: 10 characters
Example (HP Basic):
OUTPUT 712;"TDEF?"
ENTER 712;A$
DISP A$
→
Display:
TDEF 05.00
Comment
The selected TDEF value is saved to setup memory as a device
setting with the SAVE command.
See also chapter 4.7.3, SEQUENCE Function.
Transmitted
txt
Parameter
Response from SSP32N
Memory Location,
Before
Memory Location,
After
None
or
NC
Valid setpoints
New setpoints are transferred,
text parameter remains unchanged
Empty
New setpoints are transferred,
text parameter is set to NC
ON
Any
New setpoints are transferred,
text parameter is set to NC
OFF
Any
New setpoints are transferred,
text parameter is set to NC
CLR
Any
Memory content is deleted
Command
Value Range
Meaning
a
Sto
re?
Query contents of a memory range from the start
address to the stop address (AAA and EEE)
b
Sto
re? n
n = 11 ... 255 Query contents of memory location n
c
Sto
re? n1,n2
n1, n2
= 11 ... 255
n2
≥
n1
Query contents of a memory range from address
n1 to address n2
d
Sto
re? n1,n2,tab n1, n2
= 11 ... 255
n2
≥
n1
Query contents of a memory range from address
n1 to address n2, delimiter between output
parameters:
Tabulator character = 09h,
decimal point = decimal comma,
line break = 0Ah
Setting Range:
00.01
[s] –
99.99
[s]
Resolution:
10 ms
