60
Switch(config-if)# no poe schedule 0
Syntax
poe budget DC1/DC2 [POWER]
Parameters
DC1 : DC 1 power input
DC2 : DC 2 power input
POWER : 1 – 480
Command Mode
Configuration mode
Description
Set the power budget of DC1 or DC2
Examples
Set the power budget of DC1 to 480W
Switch(config)# poe budget DC1 480
Syntax
poe budget warning <0-100>
Parameters
<0-100> 0 is disable, valid range is 1 to 100 percentage
Command Mode
Configuration mode
Description
Set the warning water level of total power budget.
Examples
Set the warning water level to 60%
Switch(config-if)# poe budget warning 60
Syntax
poe pd_detect enable/disable
Parameters
enable: enable PD Status Detection function
disable: disable PD Status Detection function
Command Mode
Configuration mode
Description
Enable/Disable the PD Status Detection function
Examples
To enable the function of pd status detect function
Switch(config)# poe pd_detect enable
To disable the function of pd status detect function
Switch(configf)# poe pd_detect disable
Syntax
poe pd_detect ip_address cycle_time
Parameters
IP address : A.B.C.D
Cycle time : Valid range 10-3600 second and must be multiple
of 10
Command Mode
Configuration mode
Description
Apply a rule of PD Status Detection.
Examples
Apply a rule which ping 192.160.1.2 per 20 seconds. And if
192.160.1.2 is timeout, pd status detection will re-enable the
PoE.
Switch(config)# poe pd_detect 192.160.1.2 20
