units8
Int. temp: Selection of the temperature unit used by all of the server display elements
alarm_low8
An alarm is triggered, if the measurement value drops to or below this value.
alarm_high8
An alarm is triggered, if the measurement value meets or exceeds this value.
hysterese8
Hysteresis for the all-clear in the event of an alarm/warning (e.g. Hyst=5%, alarm or warning at
100 -> all-clear at 95) or reset the trigger (e.g. Hyst=5%, level = greater or equal, trigger at 100 ->
reset at 95)
The following parameters apply to the "Calculated channels" (see "Calculated channels" on page
64).
title60 - title64
Freely selectable channel title for the calculated channels [0-16 characters]
units60 - units64
String that is used as a measurement unit by all of the server display elements [0-16 characters]
min60 - min64
Defines the lower scale end of the pointer instruments
max60 - max64
Defines the upper scale end of the pointer instruments
decpl60 - decpl64
Number of decimal places that are used by all of the server display elements
Value
Explanation
-1
Standard
0
No decimal places
:
:
6
6 decimal places
alarm_low60 - alarm_low64
An alarm is triggered, if the measurement value drops to or below this value.
alarm_high60 - alarm_high64
An alarm is triggered, if the measurement value meets or exceeds this value.
hysterese60 - hysterese64
Hysteresis for the all-clear in the event of an alarm/warning (e.g. Hyst=5%, alarm or warning at
100 -> all-clear at 95) or reset the trigger (e.g. Hyst=5%, level = greater or equal, trigger at 100 ->
reset at 95)
80
Rev. 01
