Configuration manual
4. FTP, FTPS, TFTP and SFTP
43
www.qtech.ru
Enable the FTP server
function.
ftp enable
Mandatory.
By default, the FTP server
function is disabled.
Configure the authorized
user name and password.
user username password
0 password
Mandatory.
By default, the authorized
user name and password
are not configured.
For
details
of
the
command, refer to the
related
sections
in
"System
Control
and
Management".
Configure the monitor
port of the FTP service
ftp listen-port [ port-num
]
Optional
By default, the monitor
port number of the FTP
service is 21
Configure the maximum
allowed
number
of
concurrent login users.
ftp max-user-num user-
num
Optional.
By default, the maximum
allowed
number
of
concurrent login users is
1.
Configure the connection
timeout time.
ftp timeout time
Optional.
By default, the connection
timeout time is 300
seconds.
4.2.2
Configure an FTP Client
Configuration Condition
None
Configure the Functions of an FTP Client
On the device, when you use the copy command to copy files (Refer to the related sections in
"File System Management") or use the sysupdate command to upgrade the software version
(Refer to the related sections in "Software Upgrade"), the device can be triggered to act as the
FTP client and set up a connection with the remote FTP server.
The connection between an FTP client and an FTP server uses the address of the outgoing
interface of the route to the FTP server as the source address by default. Users can also use the
