Configuration manual
3. System Control and Management
29
www.qtech.ru
Enter
the
global
configuration mode.
configure terminal
-
Configure the enable
password.
enable password [ level level-
number ] [ 0 ] password
Mandatory.
By default, no enable
password is configured.
3.2.4
Configure Users and the Related Properties
Configuration Condition
None
Configure Auto Commands
After auto commands are configured, during the user login, the system automatically executes
the pre-configured commands. In addition, the user can configure delay time for execution of
auto commands, and configure whether to disconnect the user connection after the
commands are executed automatically. By default, the command execution is not delayed, and
the user connection is disconnected after the commands are executed automatically.
Table 3-5 Configuring auto commands
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
Configuring
auto
commands.
user username autocommand
command-line
Mandatory
Configure the options
for execution of auto
commands.
user
username
autocommand-option
{
nohangup [ delay delay-time-
number ] | delay delay-time-
number [ nohangup ] }
Optional
Configure No Password Authentication during Login
During the user login, if no password authentication is required, configure the no password
authentication function.
Table 3-6 Configuring no password authentication during login
Step
Command
Description
Enter
the
global
configuration mode.
configure terminal
-
