DL
Direct Playback Settings
Function: Direct Playback setting
Syntax:
stxDL:a,b,c, .... ,q,r;
(RS-232C, Command format: Type 2)
Syntax:
DL:a,b,c, .... ,q,r
(Telnet, Command format: Type 2)
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b – q: Phrase number which you wish to assign to control input pin
b
(CH1)
c
(CH2)
| |
q
(CH16)
Example)
DL:0,A1, ... ,A3,A4, ... ,A16,0
The setting will be written to “Card A”, and the phrases will be assigned to the control
Input pin as follows; A0001 to CH1,..., A0003 to CH3, A0004 to CH4,..., and A0016 to
CH16.
Note:
For unused direct channels, specify “----”.
If you specify “PLAY” instead of a phrase, you can playback directly the phrase shown in
the display by the control input pin.
CE
Program (Count) Playback Settings
Function: Program (Count) Playback setting
Syntax:
stxCE:a,b,c,c, .... ,c;
(RS-232C, Command format: Type 2)
Syntax:
CE:a,b,c,c, .... ,c
(Telnet, Command format: Type 2)
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b: Program Playback pattern(1 - 5)
c: Phrase number to be played back (up to 100 phrases)
Example)
CE:0,1,A1,A2,A3,A4,A5
This registers A00
01, A0002, A0003, A0004 and A0005 into the Program Playback
pattern 1 of card A.
AR-3000SD (Ver.1.00) Command Reference - 48
