LQ
Display Contrast Setting Request
Function: Display Contrast setting request
Syntax:
stxLQ;
(RS-232C, Command format: Type 1)
Syntax:
LQ
(Telnet, Command format: Type 1)
Note:
refer to 4.4.1 DC command
KQ
Network setting contents request
Function: Network setting contents request
Syntax:
stxKQ;
(RS-232C, Command format: Type 1)
Syntax:
KQ
(Telnet, Command format: Type 1)
Note:
refer to 4.4.1 NT command
AC
Activity Sensing (Verify AR-3000SD Unit Activity)
Function: Activity sensing (Verify AR-3000SD unit activity)
Syntax:
stxAC;
(RS-232C, Command format: Type 1)
Syntax:
AC
(Telnet, Command format: Type 1)
Note:
Normally, an ack/OK command will be output from the AR-3000SD by using this
command.
During playback, play pause, recording standby, recording or recording pause the Phrase
number will be output.
(* refer to 4.4.1 AC command)
VR Version
Request
Function: Version
request
Syntax:
stxVR;
(RS-232C, Command format: Type 1)
Syntax:
VR
(Telnet, Command format: Type 1)
Note:
The AR-3000SD will output the “model name” and “version”.
(* refer to the 4.4.1 VR command for the AR-3000SD)
4.2.5 Reply
Commands
ack/OK
Reply signifying normal operation
Function: Reply signifying normal operation
Syntax:
ack
(RS-232C, Command format: Type 0)
Syntax:
OK
(Telnet, Command format: Type 0)
ER
Reply to the AR-3000SD When an Error Has Occurred
Function: Reply to the AR-3000SD when an error has occurred
Syntax:
stxER:a;
(RS-232C, Command format: Type 2)
Syntax:
ER:a
(Telnet, Command format: Type 2)
a: Error number
0 Send this command to the AR-3000SD when the output of the AR-3000SD could
not be read (In the case of a request command, the AR-3000SD will re-transmit the
Setting output command.)
1 Send this command when the output of the AR-3000SD for confirmation is
incorrect in Delete mode. Then the command you transmitted will be canceled, and
the AR-3000SD will automatically exit Delete mode.
Xon (11h)/Xoff (13h) Allow or Disable Transmission. Used for Handshaking
Function: Allow or disable transmission. Used for handshaking.
Syntax:
Xon
is
11h
only
(RS-232C, transmission permitted)
Xoff
is
13h
only
(RS-232C, transmission disabled)
AR-3000SD (Ver.1.00) Command Reference - 58
